文章摘要信息

中国电机工程学报 2009, 29(20) 106-111 DOI: ISSN: 0258-8013 CN: 11-2107/TM

本期目录 | 下期目录 | 过刊浏览 | 高级检索 [打印本页] [关闭]

动力机械与工程

	扩展功能

	本文信息
	Supporting info
	PDF(293KB)
	[HTML全文]
	参考文献[PDF]
	参考文献
	服务与反馈
	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	引用本文
	Email Alert
	文章反馈
	浏览反馈信息
	本文关键词相关文章
	风力机翼型
	参数化建模
	优化设计
	神经网络
	遗传算法
	本文作者相关文章
	琚亚平
	张楚华
	PubMed
	Article by Ju,Y.B
	Article by Zhang,C.H

基于人工神经网络与遗传算法的风力机翼型优化设计方法

琚亚平，张楚华

西安交通大学能源与动力工程学院

摘要：开发风力机专用翼型是风电技术中的一个关键问题，高升阻比翼型的优化设计方法是目前风力机空气动力学的重要研究课题。该文建立了多运行工况下升阻比最高的风力机翼型优化设计方法，运用Bezier函数建立了翼型的数字化参数表征方法，根据完全析因试验设计方法选取了翼型族的设计空间，利用计算流体力学方法获得了每个翼型样本的气动性能参数，采用人工神经网络和遗传算法相结合的现代优化方法数值求解了优化命题。基于上述模型对FX 63–167翼型进行优化改进，重点研究风力机翼型在3种运行工况点下的气动优化设计命题及其求解方法。计算表明优化后翼型具有更佳的气动特性，各工况点下的升阻比均有所提高，验证了该优化方法的合理性、可行性。

关键词：风力机翼型参数化建模优化设计神经网络遗传算法

Optimal Design Method for Wind Turbine Airfoil Based on Artificial Neural Network Model and Genetic Algorithm

JU Ya-ping, ZHANG Chu-hua

School of Energy and Power Engineering, Xi’an Jiaotong University

Abstract: The development of special airfoils for wind turbines is one of the key problems in the wind power technology. The optimal design method for the high lift-drag ratio airfoil is currently the important issue in the area of wind turbine aerodynamics. An optimal design problem and the corresponding numerical method were established for wind turbine airfoils with the maximum lift-drag ratios at multiple working conditions as the optimal objective. Firstly, the airfoil profile was parameterized by Bezier curves and the design space for airfoil family was specified by the full factorial design of experiment method. Then, the aerodynamic parameters for each sample airfoil were calculated by the computational fluid dynamics method. The optimal problem was numerically solved by combining the genetic algorithm with the artificial neural network model. Finally, the above optimal method was applied to the optimal redesign of the FX 63–167 wind turbine airfoil. The results indicate that the optimized airfoil has better aerodynamic performance, whose lift-drag ratio is increased comparing with the original one at all the working conditions under consideration. It eventually confirms the feasibility and validity of the proposed optimal problem and the numerical solution method. This work is of academic and engineering values for guiding the aerodynamic design and analysis of wind turbine blades.

Keywords: wind turbine airfoil parameterized model optimal design neural network genetic algorithm

收稿日期 2008-11-21 修回日期 2009-06-10 网络版发布日期 2009-07-23

DOI:

基金项目:

国家高技术研究发展计划项目(863计划)(2007AA05Z203)；国家自然科学基金项目(10572113)；新世纪优秀人才支持计划资助项目(NCET-06-0847)。

通讯作者: 张楚华

作者简介:

作者Email:

参考文献：

本刊中的类似文章

1．王小华何怡刚.基于神经网络的电力系统高精度频率谐波分析[J]. 中国电机工程学报, 2007,27(34): 102-106

2．徐先勇罗安方璐周柯刘定国.新型调频式谐振特高压试验电源的参数设计与实现[J]. 中国电机工程学报, 2009,29(10): 24-30