中国电机工程学报 2009, 29(20) 30-34 DOI:     ISSN: 0258-8013 CN: 11-2107/TM

本期目录 | 下期目录 | 过刊浏览 | 高级检索                                                            [打印本页]   [关闭]
热能工程
扩展功能
本文信息
Supporting info
PDF(352KB)
[HTML全文]
参考文献[PDF]
参考文献
服务与反馈
把本文推荐给朋友
加入我的书架
加入引用管理器
引用本文
Email Alert
文章反馈
浏览反馈信息
本文关键词相关文章
电磁感应
高温空气
升温特性
加热件
本文作者相关文章
孙佰仲
刘秀
刘洪鹏
王擎
PubMed
Article by Xun,B.Z
Article by Liu,x
Article by Liu,H.P
Article by Yu,q
电磁感应高温空气加热特性试验研究
孙佰仲,刘洪鹏,刘秀,王擎,李少华
东北电力大学能源与机械工程学院
摘要: 将电磁感应加热技术应用到空气加热领域,研制新型高温空气加热装置。在电磁感应磁场中依靠加热装置内部感应加热件所产生的感应热对空气进行加热。在高温空气加热试验装置上,进行加热功率、空气流量、加热件初始温度对空气加热特性的影响规律的试验研究。结果表明:电磁感应高温空气加热装置能够快速方便地产生高温空气,空气终温可达900℃以上;通过改变电源功率或进入加热装置的空气流量,可以产生不同终温的高温空气。
关键词 电磁感应   高温空气   升温特性   加热件  
Experimental Investigation on Electromagnetic Induction Heating Characteristics for
SUN Bai-zhong, LIU Hong-peng, LIU Xiu, WANG Qing, LI Shao-hua
School of Energy and Mechanical Engineering, Northeast Dianli University
Abstract: Based on electromagnetic induction heating technology, a new type of high temperature air heater was manufactured. The cold air was heated by the induction heating work-pieces inside the heater. The experiment research of the temperature rising characteristics of air were carried out in different condition including different heating power, air flow rate, and initial temperature of heating work-pieces. The results show that the electromagnetic induction heater can produce high temperature air which final temperature could be above 900℃ rapidly and conveniently. High temperature air of different final temperatures also can be obtained with changing of the electrical source output power or the air flow rates inside of the air heater.
Keywords: electromagnetic induction   high temperature air   temperature rising characteristics   heating work-pieces  
收稿日期 2008-11-17 修回日期  网络版发布日期 2009-07-23 
DOI:
基金项目:

中国电机工程学会电力青年科技创新项目;东北电力大学研究生创新基金项目。

通讯作者: 孙佰仲
作者简介:
作者Email:

参考文献:
本刊中的类似文章
1.吕清刚 朱建国.煤粉在循环流化床高温空气下的燃烧与NOx排放[J]. 中国电机工程学报, 2007,27(32): 7-12
2.刘洋 崔翔 赵志斌 齐磊 陈建军.基于电磁感应原理的变电站接地网腐蚀诊断方法[J]. 中国电机工程学报, 2009,29(4): 97-103
3.楼波 罗玉和 马晓茜.回转窑内生物质高温空气燃烧NOX生成模型与验证[J]. 中国电机工程学报, 2007,27(29): 68-73
4.聂欣 周志军 吕明 周俊虎 岑可法.煤粉气流在高温空气中着火与熄火的试验研究[J]. 中国电机工程学报, 2008,28(14): 67-72
5.康志忠 孙保民 郭永红 刘岩.高温空气点火在200 MW机组锅炉中的应用[J]. 中国电机工程学报, 2009,29(14): 18-23
6.李星 贾力 张田田,杨立新.天然气高温空气燃烧特性数值研究[J]. 中国电机工程学报, 2009,29(32): 37-44

Copyright by 中国电机工程学报