|
|
中国电机工程学报 2009, 29(11) 26-31 DOI:
ISSN: 0258-8013 CN: 11-2107/TM |
|
|
|
|
本期目录 |
下期目录 |
过刊浏览 |
高级检索
[打印本页]
[关闭] |
|
| 工程热物理 |
|
|
La/Mn改性Pd/g-Al2O3催化剂对甲烷催化燃烧的影响 |
|
|
孙路石，秦晓楠，逄鹏，向军，胡松，汪一，邱建荣，徐明厚 |
|
|
华中科技大学煤燃烧国家重点实验室 |
|
|
摘要：
采用浸渍法制备了La、Mn助剂改性g-Al2O3的4种负载钯型催化剂，运用BET、X射线衍射(X-ray diffractomter，XRD等方法对催化剂的结构进行表征，对催化甲烷燃烧活性进行评价。结果表明，过渡金属Mn的掺入提高了对甲烷的活性，但也加快了g-Al2O3向a-Al2O3的相变。稀土金属La的掺入并未提高其对甲烷的活性，但高温焙烧下La的存在抑制了g-Al2O3向a-Al2O3的相变，提高了催化剂的高温热稳定性。在低温阶段，0.5Pd/Mn/Al2O3表现出较好的催化活性，而在高温阶段，0.5Pd/LaMnAl11O19的活性优于其他催化剂。作为CH4的中间产物，在700~820 ℃时，由于PdO→Pd的分解，CO的产量逐渐增加。之后，在催化氧化和均相燃烧的共同作用下，CO的产量急剧减少，接近830 ℃时几乎完全消失。 |
|
|
关键词：
浸渍法
甲烷
催化燃烧
镧
锰
|
|
|
Influence of Pd/g-Al2O3 Catalyst Modified by La/Mn on Methane Catalytic Combustion |
|
|
SUN Lu-shi, QIN Xiao-nan, PANG Peng, XIANG Jun, HU Song, WANG Yi, QIU Jian-rong, XU Ming-hou |
|
|
State Key Lab. of Coal Combustion, Huazhong University of Science & Technology |
|
|
Abstract:
Four kinds of palladium catalysts, supported on g-Al2O3 and promoted by La and/or Mn, were prepared by impregnation method. The physico-chemical properties of these catalysts were characterized by BET and XRD techniques. The effect of methane combustion activity of the catalyst samples were investigated. The results indicat that the catalyst mixed with the transition metal Mn leads to an enhancement in methane combustion, whereas accelerates transition of g-Al2O3 to a-Al2O3. The catalyst mixed with the earth metal La does not improve methane combustion activity obviously, but restrains transition g-Al2O3 to a-Al2O3 as well as enhances thermal stability of catalysts under high-temperature calcination. 0.5Pd/Mn/Al2O3 performs reasonably better catalytic activity during low temperature stage, however 0.5Pd/LaMnAl11O19 shows the best catalytic active among the all catalysts under high temperature stage. As a interim product of CH4, CO yield increases gradually between 700 ℃ and 800℃, which is caused by decomposition of PdO to Pd with less activity. After that, CO yield derceases quickly and nearly disappears when the temperature rises to
830 ℃ caused by cooperate effect of catalytic activity and homogeneous combustion. |
|
|
Keywords:
impregnation method
methane
catalytic combustion
lanthanum
manganese
|
|
|
收稿日期 2008-04-29 修回日期 网络版发布日期 2009-04-20 |
|
|
DOI: |
|
|
基金项目:
国家高技术研究发展计划项目(863计划)(2006AA05Z302)；国家杰出青年科学基金项目(50525619)。 |
|
|
通讯作者: 孙路石 |
|
|
作者简介: |
|
作者Email: |
|
|
| 参考文献： |
|
| 本刊中的类似文章 |
| 1．楚双霞 刘林华.甲烷-空气扩散燃烧过程熵产分析[J]. 中国电机工程学报, 2008,28(29): 34-40 |
| 2．胥波 张彦文 蔡宁生.加入CH4促进选择性非催化还原的CFD模拟研究[J]. 中国电机工程学报, 2009,29(5): 37-41 |
| 3．张彦文 蔡宁生.加入甲烷促进选择性非催化还原反应的实验研究[J]. 中国电机工程学报, 2007,27(35): 7-11 |
| 4．李军伟 钟北京.微细直管燃烧器的散热损失研究[J]. 中国电机工程学报, 2007,27(20): 59-64 |
| 5．冉景煜 胡建红 张力 唐强.微细腔内甲烷湿空气预混催化重整产氢特性[J]. 中国电机工程学报, 2007,27(8): 42-48 |
| 6．张彦文 蔡宁生.加入甲烷促进选择性非催化还原反应的机理验证和分析[J]. 中国电机工程学报, 2008,28(2): 49-54 |
| 7．云玉新 陈伟根 孙才新 潘翀.变压器油中甲烷气体的光声光谱检测方法[J]. 中国电机工程学报, 2008,28(34): 40-46 |
| 8．周俊虎 汪洋 杨卫娟 刘建忠 王智化 岑可法.燃烧器材料的热物理性质对微尺度催化燃烧的影响[J]. 中国电机工程学报, 2010,30(5): 11-16 |
| 9．尹娟 翁一武.贫燃催化燃烧燃气轮机的燃烧与系统性能分析[J]. 中国电机工程学报, 2010,30(11): 1-7 |
|
| Copyright by 中国电机工程学报 |
