|
|
中国电机工程学报 2008, 28(32) 82-88 DOI:
ISSN: 0258-8013 CN: 11-2107/TM |
|
|
|
|
本期目录 |
下期目录 |
过刊浏览 |
高级检索
[打印本页]
[关闭] |
|
| 动力机械与工程 |
|
|
基于优先级诊断树的旋转机械故障诊断专家系统 |
|
|
窦东阳 赵英凯 |
|
|
南京工业大学机械与动力工程学院 南京工业大学机械与动力工程学院 |
|
|
摘要：
针对旋转机械故障知识的膨胀导致的专家系统诊断效率低下以及知识库难以维护的问题，提出了一种新的、基于优先级诊断树的专家系统框架。将诊断设备分解建立诊断树并划分领域知识库，再利用模糊群组多属性决策方法排序诊断树导出元知识，并在弹性匹配模式基础上改进了规则的匹配方式。诊断时，推理机从优先级最高的节点开始，按照元知识进行规则的搜索、匹配，以此建立某设备动力与传动装置的故障诊断系统。研究表明，与传统专家系统相比，新系统具有更高的效率、并且诊断结论更可靠、可维护性也更好。 |
|
|
关键词：
旋转机械
故障诊断
专家系统
诊断树
模糊群组多属性决策
弹性匹配模式
|
|
|
A Priority and Diagnosis Tree-based Expert System for Fault Diagnosis of Rotating Machinery |
|
|
DOU Dong-yang ZHAO Ying-kai |
|
|
|
|
|
Abstract:
To solve the problems of expert systems such as low efficiency of search and poor maintenance of knowledge base which are caused by the greatly expansion of the fault knowledge of rotating machinery, a new framework of expert system based on priority and diagnosis tree was proposed. A diagnostic tree was built according to the functions of the devices in the machine and the entire domain knowledge base was decomposed into a number of sub-bases. The diagnostic priorities of nodes in the tree are determined based on a fuzzy group multiple attribute decision making method and a
meta knowledge base was generated automatically. Some improvement was made to the matching method on the base of the flexible matching model. The inference process starts from the node with the highest priority and searches for possible device at fault based on the meta knowledge base. According to the new framework, a fault diagnosis system for the power and gearing equipment was set up. The experiment result shows that the new system is more efficient, more reliable and much easier to maintain. |
|
|
Keywords:
rotating machinery
fault diagnosis
expert system
diagnosis tree
fuzzy group multiple attribute decision making method
flexible matching model
|
|
|
收稿日期 2008-03-24 修回日期 1900-01-01 网络版发布日期 |
|
|
DOI: |
|
|
基金项目:
|
|
|
通讯作者: 窦东阳 |
|
|
作者简介: |
|
作者Email: ddy41@163.com |
|
|
| 参考文献： |
|
| 本刊中的类似文章 |
| 1．张龙 熊国良 柳和生 邹慧君 陈慧.基于时变自回归模型与支持向量机的旋转机械故障诊断方法[J]. 中国电机工程学报, 2007,27(9): 99-103 |
| 2．向玲 朱永利 唐贵基.HHT方法在转子振动故障诊断中的应用[J]. 中国电机工程学报, 2007,27(35): 84-89 |
| 3．唐贵基 向玲 朱永利.基于HHT的旋转机械油膜涡动和油膜振荡故障特征分析[J]. 中国电机工程学报, 2008,28(2): 77-81 |
| 4．刘占生 窦唯.基于旋转机械振动参数图形融合灰度共生矩阵的故障诊断方法[J]. 中国电机工程学报, 2008,28(2): 88-95 |
| 5．王自营 邱绵浩 安钢.增量学习直推式支持向量机及其在旋转机械状态判别中的应用[J]. 中国电机工程学报, 2008,28(32): 89-95 |
| 6．杜必强 唐贵基 王松岭.旋转机械振动信号分形编码及重构算法[J]. 中国电机工程学报, 2008,28(20): 77-81 |
| 7．杨龙兴 贾民平.基于时频周期窗的旋转机械故障诊断方法[J]. 中国电机工程学报, 2006,26(3): 141-145 |
|
| Copyright by 中国电机工程学报 |
