中国电机工程学报 2008, 28(24) 88-93  DOI:      ISSN: 0258-8013 CN: 11-2107/TM

本期目录 | 下期目录 | 过刊浏览 | 高级检索                                                            [打印本页]   [关闭]
电机与电器
扩展功能
本文信息
Supporting info
PDF(282KB)
[HTML全文]
参考文献[PDF]
参考文献
服务与反馈
把本文推荐给朋友
加入我的书架
加入引用管理器
引用本文
Email Alert
文章反馈
浏览反馈信息
本文关键词相关文章
电机驱动系统
故障检测
故障诊断
故障容错
电励磁双凸极电机
本文作者相关文章
魏佳丹
PubMed
Article by
双凸极电机全桥变换器单相开路故障容错方案
魏佳丹 周波
航空电源航空科技重点实验室(南京航空航天大学) 航空电源航空科技重点实验室(南京航空航天大学)
摘要: 电机驱动系统中变换器是最薄弱、故障出现率最高的环节,故障后电机运行在非平衡状态,长时间工作将导致电机损坏,使整个系统丧失工作能力。因此对驱动系统变换器故障的检测、诊断是提高系统可靠性,实现容错运行的关键。该文对电励磁双凸极电机驱动系统的全桥变换器单相故障进行了分析,对各种故障状态进行了分类;通过将故障桥臂切除,重构系统变换器,使驱动系统能够故障后容错运行,并能够维持系统的输出特性。实验验证了该容错方案能够实现驱动系统从故障状态到容错运行的平滑、可靠切换,有效提高了系统的可靠性。
关键词 电机驱动系统   故障检测   故障诊断   故障容错   电励磁双凸极电机  
Project on Single Phase Open-circuit Fault Tolerance of Doubly Salient Electro-magnet Motor Driven by Full-bridge Converter
WEI Jia-dan ZHOU Bo
Abstract: Inverter is the weakest part of the motor drives, when the drive operates in unbalanced conditions under faults, it would cause serious problems. In order to improve drive's reliability, the fault tolerance is proposed and being realized following key steps such as fault detection, fault identification and fault isolation. The paper first analyzes the open phase faults of doubly salient electro-magnet motor (DSEM) drives, and classifies the various fault states. The proposed fault tolerance system provides compensation to maintain the performance of the drives for open-circuit faults in power inverter. The drive system after fault identification is reconstructed by the four-switch three-phase topology. The fault tolerance system quickly recovers the control performance after short detecting time. Experiments confirm the feasibility of the proposed fault tolerance system.
Keywords: motor drives   fault detection   fault identifi-cation   fault tolerance   doubly salient electro-magnet motor  
收稿日期 2007-02-28 修回日期 1900-01-01 网络版发布日期  
DOI:
基金项目:

通讯作者: 魏佳丹
作者简介:
作者Email: weijiadan@nuaa.edu.cn

参考文献:
本刊中的类似文章
1.何洪文 余晓江 孙逢春 张承宁.电动汽车电机驱动系统动力特性分析[J]. 中国电机工程学报, 2006,26(6): 136-140

Copyright by 中国电机工程学报