文章摘要信息

中国电机工程学报 2008, 28(20) 131-136 DOI: ISSN: 0258-8013 CN: 11-2107/TM

本期目录 | 下期目录 | 过刊浏览 | 高级检索 [打印本页] [关闭]

发电机

	扩展功能

	本文信息
	Supporting info
	PDF(335KB)
	[HTML全文]
	参考文献[PDF]
	参考文献
	服务与反馈
	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	引用本文
	Email Alert
	文章反馈
	浏览反馈信息
	本文关键词相关文章
	汽轮发电机
	转子
	气隙取气
	风斗
	数值模拟
	本文作者相关文章
	马有福
	PubMed
	Article by

气隙取气汽轮发电机转子全隐式甩风斗甩风特性的数值研究

马有福袁益超刘聿拯周文铸胡晓红

上海理工大学动力工程学院上海理工大学动力工程学院上海理工大学动力工程学院上海理工大学动力工程学院上海理工大学动力工程学院

摘要：为提高全隐式甩风斗甩风能力，在分析全隐式甩风斗结构对其甩风性能影响的基础上，采用动态模型对全隐式甩风斗甩风特性进行了数值研究。通过对38个不同结构全隐式甩风斗流道内流场的分析与甩风量的比较，得到了结构参数出流角a、导流槽倾角b和槽深d对全隐式甩风斗甩风性能的影响规律。综合考虑全隐式甩风斗甩风性能与其结构强度，推荐在无导流槽时取a=70°；有导流槽时取a=65°~75°、b=30°~45°，在风斗及转子结构强度允许的条件下d越大越好。

关键词：汽轮发电机转子气隙取气风斗数值模拟

Numerical Studies on the Ventilation Characteristics of Concave Outflow Slot Wedge Applied to Gap-pickup Rotor in Turbo-generator

MA You-fu YUAN Yi-chao LIU Yu-zheng ZHOU Wen-zhu HU Xiao-hong

College of Power Engineering, University of Shanghai for Science and Technology College of Power Engineering, University of Shanghai for Science and Technology College of Power Engineering, University of Shanghai for Science and Technology College of Power Engineering, University of Shanghai for Science and Technology College of Power Engineering, University of Shanghai for Science and Technology

Abstract: Based on analysis of the influences of the structures of concave outflow slot wedge (COSW) on the wind rejection characteristics, a numerical simulation study on the ventilation characteristics of COSW was carried out with the dynamic model, to improve the ventilation performance of COSW. By analysis of flow field in flow channels and comparisons of ventilation quantity among 38 various structures of COSW, the influences of such structures as outflow angle a、guide flow slot slope b and slot depth d on the ventilation performance of COSW were obtained. The resulting recommended structures are a=65°~75°, b=30°~45° for COSW with guide flow slot and a=70° for COSW without guide flow slot, in all-around consideration of the ventilating performance and the structural intensity of COSW. As to d, it should be as high as possible within the permission of structural intensity of COSW and rotor.

Keywords: turbo-generator rotor gap-pickup slot wedge numerical simulation

收稿日期 2007-09-24 修回日期 1900-01-01 网络版发布日期

DOI:

基金项目:

通讯作者: 马有福

作者简介:

作者Email: punypony@163.com

参考文献：

本刊中的类似文章

1．路义萍李伟力马贤好靳慧勇.大型空冷汽轮发电机转子温度场数值模拟[J]. 中国电机工程学报, 2007,27(12): 7-13

2．康锦萍刘晓芳罗应立李志强张国兰.不同容量汽轮发电机负载非线性特性的对比研究[J]. 中国电机工程学报, 2009,29(24): 73-77

3．李俊卿李和明.汽轮发电机状态监测中定子温度标准值的确定[J]. 中国电机工程学报, 2007,27(9): 87-91