中国电机工程学报 2008, 28(14) 38-43  DOI:      ISSN: 0258-8013 CN: 11-2107/TM

本期目录 | 下期目录 | 过刊浏览 | 高级检索                                                            [打印本页]   [关闭]
热能工程
扩展功能
本文信息
Supporting info
PDF(299KB)
[HTML全文]
参考文献[PDF]
参考文献
服务与反馈
把本文推荐给朋友
加入我的书架
加入引用管理器
引用本文
Email Alert
文章反馈
浏览反馈信息
本文关键词相关文章
炉膛
测量
小波分析
声学法
本文作者相关文章
李言钦
PubMed
Article by
小波分析在声学法炉内空气动力场测量中的应用
李言钦 胡尚锋 王保东 魏新利
郑州大学节能技术研究中心 郑州航天电子技术有限公司 郑州大学节能技术研究中心 郑州大学节能技术研究中心
摘要: 声学法测量是炉内动力场检测的先进方法,但是,由于炉内复杂的环境噪声及声波传播时的衰减,声波信号的可靠辨识以获得准确的传播时间成为该方法的关键之一。基于小波技术在包括信号处理等许多方面所具有的巨大优越性,研究了小波分析应用于声学法测量的方法。将静态场中的声波信号加上不同随机噪声并进行滤波分析,证明小波法的结果明显优于传统滤波方法。在此基础上,结合声学法测量中具体声波信号的特点,给出了小波及小波包分析在声波信号消噪处理中的应用方法及其在炉膛模型动力场声学法测量实验中的应用结果。
关键词 炉膛   测量   小波分析   声学法  
Wavelet Analysis Application on Aerodynamic Field Measurement in Furnace by Acoustic Method
LI Yan-qin HU Shang-feng WANG Bao-dong WEI Xin-li
Abstract: Acoustic method is an advanced technique for the aerodynamic field measurement in furnace. However, for the complicated background noise and the attenuation of acoustic signals in propagation, reliable identification of the signals received is a key to achieve the accurate flight time data. Wavelet analysis possesses a giant advantage in many fields including signal processing. This paper showed that by adding different random noise to the acoustic signals transmitting in a static field, and then comparing the filtering effects by different methods, the wavelet analysis proves to be more effective than the traditional method. The wavelet analysis was used to process the acoustic signals from the aerodynamic field measurement in a furnace model, with satisfactory measuring results presented. And as well, the principle of using wavelet and wavelet packet to analyze the acoustic signals in the measurement was introduced.
Keywords: furnace   measurement   wavelet analysis   acoustic method  
收稿日期 2007-08-20 修回日期 1900-01-01 网络版发布日期  
DOI:
基金项目:

通讯作者: 李言钦
作者简介:
作者Email: liyq@zzu.edu.cn;goon--@hotmail.com;lyq_hy@263.sina.com

参考文献:
本刊中的类似文章
1.韩璞 张欣 王兵 潘卫华.基于神经网络的交互式炉膛火焰图像识别[J]. 中国电机工程学报, 2008,28(20): 22-26
2.沈国清 安连锁 姜根山 张波.基于声学CT重建炉膛二维温度场的仿真研究[J]. 中国电机工程学报, 2007,27(2): 11-14
3.胡南 王巍 姚宣 杨海瑞 吕俊复.38 m/54 m高循环流化床床内流体动力特性研究[J]. 中国电机工程学报, 2009,29(26): 7-12

Copyright by 中国电机工程学报