|
|
中国电机工程学报 2008, 28(15) 118-122 DOI:
ISSN: 0258-8013 CN: 11-2107/TM |
|
|
|
|
本期目录 |
下期目录 |
过刊浏览 |
高级检索
[打印本页]
[关闭] |
|
| 电机与电器 |
|
|
沿面击穿型触发真空开关的热传导模型分析 |
|
|
廖敏夫 段雄英 邹积岩 |
|
|
大连理工大学电气工程与应用电子技术系 大连理工大学电气工程与应用电子技术系 大连理工大学电气工程与应用电子技术系 |
|
|
摘要：
介绍了沿面击穿型触发真空开关的基本结构和工作过程。从沿面击穿型触发真空开关场致发射击穿机理的分析出发，通过数学建模，引入热力学运动方程，建立了沿面型触发真空开关的真空放电阴极斑点热传导模型，它可以用来描述和估算沿面放电方式下触发真空开关的时延特性。然后以初始等离子体的产生与扩展机理为重点，讨论了沿面型触发真空开关的时延特性，对于采用氢化钛作为涂敷材料的沿面击穿型触发真空开关，进行了具体的分析计算。研究表明，以所建立的阴极斑点热传导模型为基础计算得到的时延结果和Lafferty及Farrall的经典实验数据相吻合，证明了计算模型的正确性。 |
|
|
关键词：
触发真空开关
初始等离子体
阴极斑点
热传导模型
时延特性
|
|
|
Analysis on Heat Conduction Model of Surface-flashover Triggered Vacuum Switch |
|
|
LIAO Min-fu DUAN Xiong-ying ZOU Ji-yan |
|
|
|
|
|
Abstract:
The basic structure and operating process of the surface-flashover triggered vacuum switch(TVS) were depicted. The field-breakdown mechanism in surface-flashover TVS was analyzed. Based on the behavior of heat in solids, the heat conduction model was set up for describing the heating process of the spots on the cathode, which occur in the the surface-flashover TVS when triggered. The model can be used for explaining the initial plasma's production and expansion mechanism and calculating the breakdown delay time on the improvement of the initial plasma produced by the trigger electrodes. For the surface-flashover TVS whose surface of dielectric between the trigger electrodes was coated with the TiH layer, the calculation using the heat conduction model was carried out. The calculation results have a good agreement with Lafferty and Farrall's experimental data. |
|
|
Keywords:
triggered vacuum switch
initial plasma
cathode spot
heat conduction model
delay time
|
|
|
收稿日期 2006-12-13 修回日期 1900-01-01 网络版发布日期 |
|
|
DOI: |
|
|
基金项目:
|
|
|
通讯作者: 廖敏夫 |
|
|
作者简介: |
|
作者Email: mfliao@dlut.edu.cn |
|
|
| 参考文献： |
|
| 本刊中的类似文章 |
|
| Copyright by 中国电机工程学报 |
