中国电机工程学报 2007, 27(15) 110-116  DOI:      ISSN: 0258-8013 CN: 11-2107/TM

本期目录 | 下期目录 | 过刊浏览 | 高级检索                                                            [打印本页]   [关闭]
电机电工
扩展功能
本文信息
Supporting info
PDF(238KB)
[HTML全文]
参考文献[PDF]
参考文献
服务与反馈
把本文推荐给朋友
加入我的书架
加入引用管理器
引用本文
Email Alert
文章反馈
浏览反馈信息
本文关键词相关文章
SF6高压断路器
压力特性
机械特性
耦合数值模拟
本文作者相关文章
魏俊梅
PubMed
Article by
SF6高压断路器压力特性与机械特性耦合数值模拟
魏俊梅 林莘
沈阳工业大学电气工程学院 沈阳工业大学电气工程学院
摘要: SF6高压断路器对某一具体故障的成功开断是其灭弧室结构、开断电流和操动机构三者共同作用的结果,这使得断路器压力特性与机械特性的耦合数值模拟在断路器结构设计和优化中占有非常重要的地位。基于气体质量守恒、能量守恒定律和牛顿第二定律,采用模块化拓扑关联分析方法,建立了SF6高压断路器压力特性与机械特性耦合数值分析计算方法。应用该方法对126kV/40kA SF6高压断路器空载、T100s开断压气缸内气体压力特性和操动机构的机械特性进行耦合数值计算,对比了开断电弧对压气缸内气体压力特性、质量和焓的流动特性及操动机构行程曲线的影响。
关键词 SF6高压断路器   压力特性   机械特性   耦合数值模拟  
Pressure Character and Mechanism Character Coupling Computation of SF6 High Voltage Circuit Breaker
Abstract: Successful interruption of certain fault current for SF6 high voltage circuit breaker is cooperation result of chamber,interrupted current and operation mechanism.That makes co-computation of pressure character and mechanism character of a circuit breaker important in circuit breaker structure designing and optimization. Based on laws of gas mass conservation,energy conservation and Newton second force, using module and topology principle, coupling computation method of pressure character and mechanism character of SF6 high voltage circuit breaker was built. Applying this method associating noload operation and T100s test duty the gas pressure characters of piston and mechanism characters of operation mechanism of 126kV/40kA SF6 circuit breaker were coupling calculated. Influences of interrupted arc on pressure character, mass and enthalpy flow character and the strokes of operation mechanism were compared.
Keywords: SF6 high voltage circuit breaker   pressure character   mechanism character   coupling computation  
收稿日期 2006-05-19 修回日期 1900-01-01 网络版发布日期  
DOI:
基金项目:

通讯作者: 魏俊梅
作者简介:
作者Email: sy_weijunmei@163.com

参考文献:
本刊中的类似文章
1.王尔智 陶瑞民.SF6断路器吹弧气体流动的边界元数值计算中基本解的求取[J]. 中国电机工程学报, 2006,26(1): 146-150

Copyright by 中国电机工程学报