中国电机工程学报 2007, 27(12) 65-70  DOI:      ISSN: 0258-8013 CN: 11-2107/TM

本期目录 | 下期目录 | 过刊浏览 | 高级检索                                                            [打印本页]   [关闭]
电机电工
扩展功能
本文信息
Supporting info
PDF(210KB)
[HTML全文]
参考文献[PDF]
参考文献
服务与反馈
把本文推荐给朋友
加入我的书架
加入引用管理器
引用本文
Email Alert
文章反馈
浏览反馈信息
本文关键词相关文章
无刷直流电动机
场路耦合
时步法
有限元分析
插值运动边界法
本文作者相关文章
刘瑞芳
PubMed
Article by
永磁无刷直流电动机场路耦合运动时步有限元分析
刘瑞芳 严登俊 胡敏强
北京交通大学电气工程学院 河海大学电气工程学院 东南大学电气工程系
摘要: 提出一种适用于永磁无刷直流电动机的场路耦合运动时步有限元分析方法,解决了电机在非正弦供电时的场路耦合分析问题。电路中考虑了开关元件换流重叠过程和绕组中点的电位波动。给出了控制电路与电磁场方程耦合的时步有限元单元分析方法,采用改进的有限元运动边界处理方法--插值运动边界法解决转子运动问题。应用上述模型对1台无刷直流电动机的进行分析,计算结果和样机的实测波形吻合。该方法也适用于其他非正弦供电电机的场路耦合有限元分析。
关键词 无刷直流电动机   场路耦合   时步法   有限元分析   插值运动边界法  
Field Circuit and Movement Coupled Time Stepping Finite Element Analysis on Permanent Magnet Brushless DC Motors
Abstract: A time stepping finite element analysis(FEA) model coupled circuit field and movement used in analyzing permanent magnet brushless DC(BLDC) motors is presented in this paper, which can solve the problem of non-sinusoidal power supply in field-circuit coupled FEA. The converting process of switching element operation and electric position fluctuation of the circuit winding neutral point are taken into account in circuit equation. The element analysis about the coupling problem of control circuit and field is researched. An improved moving finite element method, interpolation moving boundary method, is adopted to solve rotation problem. The performance of a BLDC motor is analyzed using above model. The calculation result is very close to the measure results. This method can be used in analyzing other non-sinusoidal power supply machines.
Keywords: brushless direct current motor   field-circuit and movement coupled   time-stepping method   finite element analysis   interpolation moving boundary method  
收稿日期 2006-02-13 修回日期 1900-01-01 网络版发布日期  
DOI:
基金项目:

通讯作者: 刘瑞芳
作者简介:
作者Email: rfliu@center.njtu.edu.cn

参考文献:
本刊中的类似文章
1.方红伟 夏长亮 方攸同 魏熙乐.无刷直流电动机二阶离散平滑滤波器位置伺服控制[J]. 中国电机工程学报, 2009,29(3): 65-70
2.马瑞卿 刘卫国 解恩.双余度无刷电动机位置伺服系统仿真与试验[J]. 中国电机工程学报, 2008,28(18): 98-103
3.王道涵 王秀和 丁婷婷 杨玉波 张冉 刘士勇.基于磁极不对称角度优化的内置式永磁无刷直流电动机齿槽转矩削弱方法[J]. 中国电机工程学报, 2008,28(9): 66-70
4.王雷 蒋静坪.无刷直流电机自适应补偿最优状态反馈速度控制[J]. 中国电机工程学报, 2008,28(24): 101-107
5.程树康 葛新 高宏伟 王宗培.分数槽无刷直流电动机齿槽定位力矩的研究[J]. 中国电机工程学报, 2008,28(21): 107-111
6.董慧芬 周元钧 沈颂华.双通道无刷直流电动机容错动态性能分析[J]. 中国电机工程学报, 2007,27(21): 89-94

Copyright by 中国电机工程学报