中国电机工程学报 2007, 27(6) 12-16  DOI:      ISSN: 0258-8013 CN: 11-2107/TM
本期目录 | 下期目录 | 过刊浏览 | 高级检索                                                            [打印本页]   [关闭]
电工电机
扩展功能
本文信息
Supporting info
PDF(187KB)
[HTML全文]
参考文献[PDF]
参考文献
服务与反馈
把本文推荐给朋友
加入我的书架
加入引用管理器
引用本文
Email Alert
文章反馈
浏览反馈信息
本文关键词相关文章
永磁无刷直流直线电机
齿槽定位力
齿槽效应
有限元方法
谐波分析
本文作者相关文章
罗宏浩
PubMed
Article by
动磁式永磁无刷直流直线电机的齿槽力最小化
罗宏浩 吴峻 常文森
国防科技大学磁悬浮研究中心 国防科技大学磁悬浮研究中心 国防科技大学磁悬浮研究中心
摘要： 为提高永磁无刷直流直线电机的性能，必须研究减小其齿槽定位力(齿槽力)的技术措施。根据电磁弹射系统需要推进大质量载荷的要求，提出了1种大推力的动磁式永磁无刷直流直线电机模型。用有限元方法计算了磁极端部与定子齿槽相互作用形成的3种齿槽力分量，由傅里叶变换得到了各分量的功率谱。在对各分量进行频谱分析的基础上得出了产生齿槽力的主要原因是电机推力的二次谐波这一结论，提出了优化磁极宽度以减小齿槽力的方法。对优化设计后的电机模型进行了有限元计算和频谱分析，分析显示该电机模型推力的二次谐波已被大大削弱。计算了不同磁极宽度情况下的电机推力，结果表明采用该方法可以有效减小电机的推力波动。
关键词： 永磁无刷直流直线电机   齿槽定位力   齿槽效应   有限元方法   谐波分析  
Minimization of Cogging Force in Moving Magnet Type PMBLDCLM
Abstract: Researches on reducing cogging force is indispensable for improving the performance of permanent magnet brushless DC linear motor(PMBLDCLM). A moving magnet type PMBLDCLM was presented to meet the need of pushing heavy load. Three components of cogging force caused by the reaction of stator slots and magnet edges were calculated by finite element method(FEM) and their power spectrums were computed by Fourier transform. Analysis of the power spectrums leads to a conclusion that the cogging force is caused mainly by the second harmonic of the motor thrust. A method of optimizing magnet width to minimize the cogging force was proposed on the basis of harmonic analysis. The optimal magnet width of presented model was given and the harmonic analysis of the motor cogging force indicated that the second harmonic of the motor thrust was diminished significantly. Finally, several motor models with different magnet width were designed and their thrusts were computed. The FEM calculation results prove that the thrust fluctuation of the motor can be effectively cut down with proposed method.
Keywords: permanent magnet brushless direct current linear motor   cogging force   slotted effect   finite element method   harmonic analysis  
收稿日期 2005-12-19 修回日期 1900-01-01 网络版发布日期  
DOI:
基金项目:

通讯作者: 罗宏浩
作者简介:
作者Email: luohh163@163.com
参考文献：
本刊中的类似文章
Copyright by 中国电机工程学报